Cracked heat exchanger can cause grave danger

Cracked Heat Exchanger

Cracks or holes within the heat exchanger in small residential furnaces and roofs can’t be fixed for long-term as well as temporary repairs will probably cost greater than a new unit. It’s possible easy to seal the opening temporarily before the unit could be changed, however the metal within the heat exchanger is generally too thin to weld, impossible to gain access to despite getting rid of it entirely, in most cases for each hole or crack that may be seen you will see two more that the can’t see.

Heat exchangers fail from age, hrs of operation, and from operating conditions. A correctly maintained system can last two decades or even more, but anything past twenty five years ought to be changed, weather you can observe a crack or otherwise.


While Patches perform, It’s never the answer

Patches or sealant can be used as emergency if there’s some risk of freezing, however the flame should be burning cleaning and sufficient ventilation should be present before trying for doing things. Utilization of a great CO detector will practically eliminate any threat to existence. The CO detector is placed set off a 15PPM to 25 Parts per million and won’t identify NOX. You would like the CO level to become , temporary exposure at lower levels of CO is stated to become harmless but long-term exposure a minimal levels could be even worse like a temporary exposure at greater levels.


A crack may cause the demands within the heat exchanger to alter effecting the way it burns. Once the supply fan occurs it may blow air to the writers or suck flue gas from the heat exchanger This effect can get worst because the furnace gets hotter from expansion and also the crack will get bigger. This could make the writers to create high CO as high a 2500 Parts per million and supply the second requirement to CO poisoning. High quality gas furnaces are specifically harmful to this, because of the tight air/gas ratio used..

Leave Your Comment